Administrator Screen - Western Digital N600 User Manual

Administrator Screen

Admin Password
Original Password
New Password/Verify New
Password
Administration
Enable HTTPS Server
Remote Management
Enable Remote
Management
Remote Admin Port
Use HTTPS
Time Settings Screen
Time and Date Configuration
Time
Time Zone
Enable Daylight Saving
Daylight Saving Offset
Daylight Saving Dates
Automatic Time and Date Configuration
Network Time Protocol
Function
Adding User Defined NTP
Server
NTP Server Used
MY NET ROUTERS
USER MANUAL
Enter the existing password for the admin (administrator) account.
password
The default is
Type the same new password for each.
Click to enable or disable Hypertext Transfer Protocol Secure
(HTTPS), a combination of Hypertext Transfer Protocol (HTTP) with
SSL/TLS protocol. It provides encrypted communication and
secure identification of your web connections to your router.
Click to enable the user to manage the router from a remote
location.
The port that will be used for remote management connections.
Default is 8080. The Remote Admin Port cannot be used in an
external port range of any port forwarding rules.
Click to enable or disable use of HTTPS for remote management of
the router.
Current date and time at the router's location.
Select the time zone in which the router is located.
Click to enable or disable Daylight Saving time.
If you select Daylight Saving time, from the drop-down list, select
the daylight saving offset. The offset is a formula that combines a
time of day with the time zone and is based on a 24-hour clock.
If you select Daylight Saving time, from the drop down lists select
the month, week, day of the week, and time of the start and end of
Daylight Saving time in your time zone.
Click to enable use of Network Time Protocol (NTP).
Add alternate NTP servers to be used.
From the drop-down list, select the name of the NTP server to be
used.
ADVANCED SETTINGS
(all lower case).
51