Western Digital N600 User Manual page 52

Priority
Type
Detail
Delete icon
FasTrack Plus QoS (My Net N900 Router)
Enable FasTrack Plus QoS
Enable FasTrack Plus
QoS
WAN Uplink Speed
Set Uplink Speed at
Classification Rules
Name
Priority
Protocol
Local IP Range
Local Port Range
Remote IP Range
Remote Port Range
MY NET ROUTERS
USER MANUAL
When creating a rule, select the precedence in which the
application or device sends data over the network compared to
other applications or devices. The default value is 1-Highest.
From the drop-down list, select the option that specifies
whether the rule applies to a connected device or to an
application.
• For Device rules, specify the LAN IP and/or Remote IP
address(es), and protocol(s) for the rule.
• For Application rules, specify the Start and End port as well
as the protocol for the rule.
• The protocols available are TCP, UDP, and Both.
Click to delete the row.
Enable or disable the QoS application to prioritize different client
applications/traffic types over the Internet.
The uplink speed (in Kbps) at which data can be transferred
from the router to your ISP. The Auto (default) setting
automatically detects the uplink speed. You can select other
values from the drop-down list or enter your own. QoS
prioritizes all Internet traffic based on this setting.
Name given to the service/client for the classification entry.
When creating a rule, select the precedence in which the
application or device sends data over the network compared to
other applications or devices. The default value is 1-Highest.
Internet protocol for transferring data. Select TCP or UDP.
IP address range of the device(s) on your local network the rule
applies to.
Port range of the application(s) on your local network the rule
applies to.
Remote IP address range of the service on the Internet the rule
applies to.
Remote port range of the service on the Internet the rule applies
to.
ADVANCED SETTINGS
48