Table of Contents
Advertisement
Getting to know your appliance
The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2.
The control panel
Your controls are equipped with piezo technology. You operate
the symbol on the metal bar by pressing it lightly.
&RQWUROV IRU
ZLSH SURWHFWLRQ
' FKLOGSURRI ORFN
WLPHU
Controls
When you touch a symbol, the respective function is activated.
The hotplates
Hotplate
Single-circuit hotplate
$
Dual-circuit hotplate
ð
Extended cooking zone
æ
When the hotplate is activated: the corresponding indicator lights up.
When the hotplate is switched on: the last selected size is automatically selected again
Residual heat indicator
The hob has a two-stage residual heat indicator for each
hotplate.
If
appears in the display the hob is still hot. It may be used,
•
for example, to keep a small meal warm or to melt cooking
Setting the hob
This section informs you how to set the hotplates. The table
shows heat settings and cooking times for various meals.
Switching the hob on and off
The main switch is used to switch the hob on and off.
To switch on: touch the
#
main switch and the
$
hotplate indicator light up. The hob is
ready for use.
To switch off: touch the
#
main switch and the hotplate indicators
are switched off. The residual heat indicator remains on until
the hotplates have cooled down sufficiently.
4
&RQWUROV IRU
$ HOHFWURQLF ERLO
'LVSOD\V IRU
KHDW VHWWLQJ³É
VWDUW FRQWURO
Í DFWLYDWLRQ
UHVLGXDO KHDW ‡¤
PDLQ VZLWFK
Activating and deactivating
Select the hotplate and touch the
Select the hotplate and touch the
symbol. The indicator above the
symbol until the display above the
$
go out. All hotplates
Note: Bending or striking the metal panel, e.g. by knocking a
pan against it, may cause a malfunction.
&RQWURO IRU
KRWSODWH VHOHFWLRQ
)RU VHWWLQJ WKH KHDW VHWWLQJ
activation symbol
ð
ð
activation symbol
chocolate. As the hotplate cools down further, the display
changes to
. The display remains lit until the hotplate has
œ
cooled sufficiently.
Note: The hob switches off automatically if all hotplates have
been switched off for more than 15 seconds.
Setting a hotplate
Set the required heat setting in the settings range.
Heat setting 1 = lowest setting
Heat setting 9 = highest setting
There is an intermediate setting between each heat setting. This
is marked in the control panel with the
6HWWLQJV UDQJH
)RU VHWWLQJ WKH WLPHU
Û
symbol.
Advertisement
Table of Contents
