Go-Video DDV2001 User Manual page 10

Follow these steps to program the remote
control to operate your television*.
Pressing the TV key puts the
remote control in TV mode. Some
or all of the highlighted keys will
be able to control your television.
N O T E S
• The remote will not operate all brands of
televisions.
• When the remote is in TV mode, it WILL
NOT operate the VCR. Press VCR to restore
normal VCR functionality.
4
Dual-Deck VCR User's Guide
1 T U R N O N T E L E V I S I O N
Press POWER on your television.
2 E N T E R C O D E
Press and hold the TV key on the VCR remote
control while entering the 2-digit code for your
brand of television with the 0-9 keys (see table
below). If there is more than one code for your
brand of television, try them all until one works.
BRAND
Daewoo .............................. TV + 19
Emerson ............................. TV + 21
Hitachi ................................ TV + 10
JVC .................................... TV + 11
LG ................................ TV + 08, 18
LG (Goldstar) ...................... TV + 06
Loewe ................................ TV + 28
Magnavox .......................... TV + 04
Mitsubishi ........................... TV + 13
Newsan (S. America) .......... TV + 27
Noblex (S.America) ............ TV + 25
Panasonic ..................... TV + 12, 24
RCA .............................. TV + 07, 29
Samsung .......... TV + 01, 14, 15, 23
Sanyo ........................... TV + 05, 20
Sharp ...................... TV + 02, 16, 22
Sony ................................... TV + 03
Telefunken .......................... TV + 26
Toshiba ............................... TV + 09
Zenith ................................. TV + 17
3 C H E C K Y O U R R E S U L T S
If the television advances to the next active
channel, programming is complete! If the
television does not respond, try another 2-digit
code. Some televisions are not listed but can be
programmed.
4 O P E R A T E Y O U R T E L E V I S I O N
When you want to control your television, press
the TV key, then try any of the keys shown in the
drawing at left.
• When the remote control is in TV mode, it
WILL NOT operate your VCR.
• To restore VCR mode, press the VCR key.
CODE(S)