Optional, Preferred Tv Connections - GoVideo Cinevision DVR1000 User Manual

Connections (Continued)

Optional, Preferred TV Connections

ote
You can ONLY listen to DVD playback using the COAX-
IAL (X), AUDIO OUT (A2) connections. The tuner and
VCR will still be heard through the RF.OUT (R) or
DVD/VCR AUDIO OUT (A1) jack. (See page 12.)
Connecting to an Amplifier Equipped with 2-
Channel Analog Stereo or Dolby Surround
Connect the Left and Right AUDIO OUT (or DVD/VCR
AUDIO OUT) jacks on the DVD+VCR to the audio left
and right in jacks on your amplifier, receiver, or stereo
system using the audio cables (for A1 or A2 connection)
supplied.
Connecting to an Amplifier Equipped with 2-
Channel Digital Stereo (PCM) or to an
Audio/Video Receiver Equipped with Multi-chan-
nel Decoder (Dolby Digital™, MPEG 2, or DTS)
Connect one of the DVD+VCR's DIGITAL AUDIO
1 1
OUT jacks (COAXIAL X) to the
corresponding in jack on your amplifier. Use an
optional digital (COAXIAL X) audio cable.
You will need to activate the DVD+VCR's digital
2 2
output. (See "Digital Audio Output" on page 19).
Digital Multi-channel Sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD+VCR (MPEG 2,
Dolby Digital and/or DTS). Check the receiver manual
and the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
otes
– If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
– 6-channel digital surround sound via the digital con-
nection can only be obtained if your receiver is
equipped with a digital multi-channel decoder.
– To see the audio format of the current DVD in the on-
screen display, press AUDIO.
DVD+VCR Connections Panel
A1
R
L
AUDIO INPUT
Amplifier (Receiver)
Accessory Audio/Video (A/V) Connections to
DVD+VCR
Connect the VCR IN LINE 1 jacks on the DVD+VCR to
the audio/video out jacks on your
accessory component, using the optional audio/video
cables.
Accessory Device Jack Panel
DVD
EXCLUSIVE
OUT
VCR IN DVD/ VCR
AUDIO
LINE 1 OUT
OUT
COAXIAL
Rear of DVD+VCR
DVD
EXCLUSIVE
OUT
VCR IN DVD/ VCR
AUDIO
LINE 1 OUT
OUT
COAXIAL
A2 X
COAXIAL
DIGITAL INPUT
AUDIO
OUTPUT
VIDEO
OUTPUT
13