Something Not Working - Electrolux EFC 9440 User Manual

Electrolux cooker hood
Hide thumbs Also See for EFC 9440:
Table of Contents

Advertisement

Something Not Working

If your appliance fails to work properly please carry out the following checks.
Symptom
The cooker hood will not start...
The cooker hood is not working
effectively..
The cooker hood has switched off
during operation...
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and
serial number.
Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.
In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge
if the fault is not a mechanical or electrical breakdown.
Solution
Check that:
The hood is connected to then electricity supply.
Check that the fan speed control is set to 1, 2 or 3.
Check that:
The fan speed is set high enough for the task.
The grease filters are clean.
The kitchen is adequately vented to allow the entry of fresh air.
If set up for recirculation, check that the charcoal filter is still
effective.
If set up for extraction, check that the ducting and outlets are not
blocked.
The safety cut-out device has been tripped
Turn off the hob and then wait for the device to reset.
If the hood has been installed below the heights indicated in the
installation instructions the motor will cut-out frequently which
will damage the hood.
7

Advertisement

Table of Contents
loading

Table of Contents