Technical Specifications
Dimensions
Height
Width
Depth
Lighting
Grease filter
power absorption
We reserve the right to generate constructive and chromatic modifications as required by technological growth.
Special accessories
Carbon filter KF 20
Installation
Unpacking
Check that the cooker hood has no damages.
Transportation damages should immediately be
reported to the one responsible for the transport
Damages, faults and eventually missing details
should immediately be reported to the seller.
Take care of the packing material so that small
children cannot play with it.
Placement
The hood is to be mounted on the wall.
When installed, the hood must be not less than 60
cm. above electric burners or 75 cm. above gas or
mixed-fuel burners (fig. 6).
Electrical connection
The electric outlet should be placed inside the
chimney.The hood has a
power cable, 140 cm, with earth connection and the
rated voltage is
220 - 240 V.
Connect the hood to the mains supply via a double
pole switch
which has 3 mm minimum separation between the
contacts 220-240 V.
The following is valid in the United Kingdom only:
- the wire which is coloured green and yellow
must be connected to the terminal in the plug
which is marked with the letter E or by the earth
symbol (
), or coloured green or green and
yellow;
- the wire which is coloured blue must be
connected to the terminal which is marked with
the letter N or coloured black, -
- the wire which is coloured brown must be
connected to the terminal which is marked with
the letter L or coloured red.
70,8-112,3
89,8
50
2 x 20 W
1
200 W
942 120 600
10
Min
60 cm
Fig. 6
Min
75 cm