Table of Contents
Advertisement
DTS Setting
Follow these steps to set the analog and digital audio formats of out-
going DTS (Digital Theater Sound) soundtracks:
1
From Stop mode, press SETUP.
2
Select Audio and press ENTER.
3
Select DTS and press ENTER.
4
Set Analog Out to:
6 Channel
(default) To output DTS 5.1 channel audio from
the 5.1 channel analog audio outputs; e.g., to a 5.1 channel
amplifier.
2 Channel
To output downmixed 2 channel stereo from the
stereo audio outputs; e.g., to a VCR or TV.
Off
To disable DTS analog output.
5
Set Digital Out to:
PCM
(default) To output 2 channel digital audio from the optical/coaxial digital audio outputs; e.g., to a Minidisc recorder.
Bitstream
To output the raw DTS digital bitstream from the optical/coaxial digital audio outputs; e.g., to an external ampli-
fier with a DTS decoder.
Off
To disable DTS output.
6
Press SETUP to save and exit
MP3 Setting
Follow these steps to set the outgoing digital audio format of MP3
tracks (Note: The analog format is fixed to 2 channel):
1
From Stop mode, press SETUP.
2
Select Audio and press ENTER.
3
Select MP3 and press ENTER.
4
Set Digital Out to:
PCM
(default) To output 2 channel digital audio from the opti-
cal/coaxial digital audio outputs; e.g., to a Minidisc recorder.
Off
To disable MP3 digital output.
5
Press SETUP to save and exit
14
Advertisement
Table of Contents
