Table of Contents
Advertisement
Transferring a call
To transfer a call from the headset to the cell phone, press the volume but-
tons "+" and "–" at the same time. Repeat the step to transfer the call back
to the headset.
Note: With some cell phones, the connection is disconnected if you transfer
the call to the cell phone. To transfer the call back to the headset, you have to
press the MF button instead of the volume buttons "+" and "–".
Managing calls*
You can answer and manage two calls on one of the connected cell phones
via the BT HS 112.
Note: You do not have the option of managing several calls from two con-
nected cell phones at the same time. When you receive a call on one cell
phone while a call is active on the other cell phone, the active call is being
ended when you answer the incoming call by briefl y pressing the MF button.
You receive a call during an active call
Hold the active call and answer the
incoming call.
End the active call and answer the
incoming call.
Continue the active call and reject
the incoming call.
You are conducting two calls, an active one and one on hold
Change between the active call
and the one on hold.
End the active call and answer the
call on hold.
Continue the active call and end
the call on hold.
Continue the active call and answer
the call on hold.
* The cell phone must support this function. You fi nd the pertinent information
in the operating instructions of the cell phone.
Press the MF button for 2 seconds.
Briefl y press the MF button.
Press the MF button twice.
Press the MF button for 2 seconds.
Briefl y press the MF button.
Press the MF button twice.
Briefl y press the "+" button.
11
Advertisement
Table of Contents
