Cutting Height - Honda HRU19K1 Owner's Manual & Service Record Booklet

5. PRE-OPERATION CHECKS - continued

Cutting Height

Check the cutter housing height settings. The lowest is approximately 16 mm
and the highest setting is 75 or 76mm. To adjust cutting height, pull the
adjustment lever toward the wheel, and move it into another notch.
If you are not sure what cutting height to select, start with a high setting and
check the appearance of the lawn after mowing a small area. Then readjust
cutting height if necessary.
NOTE: All 19" models have the height adjuster lever on the left hand side of
the Cutter Housing.
23
NOTE: 19" model shown.
Remember heights are
reversed compared to other
models ( Page 12 ).