Table of Contents
Advertisement
8 electrolux
TIMER
Count Down Timer
Use the Count Down Timer to set how long
the cooking zone operates for only this one
time.
Set the Count Down Timer after the se-
lection of the cooking zone.
You can set the heat setting before or after
you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate the Count Down Timer:
touch
of the timer to set the time (
99
-
minutes). When the indicator of the
cooking zone start to flash slow, the time
counts down.
• To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
The display shows the remaining time.
• To change the Count Down Timer: set
the cooking zone with
.
• To deactivate the timer: set the cook-
ing zone with
maining time counts back to
dicator of the cooking zone goes out. To
deactivate you can also touch
at the same time.
When the countdown comes to an end,
the sound operates and
cooking zone deactivates.
• To stop the sound: touch
CountUp Timer ( The count up timer)
Use the CountUp Timer to monitor how
long the cooking zone operates.
• To set the cooking zone (if more than
1 cooking zone operate ) : touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate the CountUp Timer: touch
of the timer
indicator of the cooking zone starts to
flash slow, the time counts up. The dis-
play switches between
time (minutes).
• To see how long the cooking zone
operates: set the cooking zone with
The indicator of the cooking zone starts
. The indicator of
. Touch
. Touch
. The re-
00
. The in-
and
00
flashes. The
comes on. When the
and counted
to flash quickly. The display shows the
time that the cooking zone operates.
• To deactivate the CountUp Timer: set
the cooking zone with
or
to deactivate the timer. The indica-
tor of the cooking zone goes out.
Minute Minder
You can use the timer as a Minute Minder
while the cooking zones do not operate.
Touch
. Touch
set the time. When the time comes to an
end, the sound operates and
• To stop the sound: touch
00
STOP+GO
The
function sets all cooking zones that
operate to the lowest heat setting.
When
operates, you cannot change the
heat setting.
The
function does not stop the timer
function.
• To activate this function touch
or
indicator comes on.
• To deactivate this function touch
The heat setting that you set before
comes on.
LOCK
When the cooking zones operate, you can
lock the control panel, but not
vents an accidental change of the heat set-
ting.
First set the heat settings.
To activate this function touch
cator comes on.
The Timer stays on.
To deactivate this function touch
indicator goes out.
When you deactivate the appliance, you al-
so deactivate this function.
THE CHILD SAFETY DEVICE
This function prevents an accidental opera-
tion of the appliance.
To activate the child safety device
• Activate the appliance with
set the heat settings.
• Touch
comes on.
• Deactivate the appliance with
.
and touch
or
of the timer to
00
for 4 seconds. The indicator
flashes.
. The
.
. It pre-
. The indi-
. The
. Do not
.
Advertisement
Table of Contents
