Table of Contents
Advertisement
• You use not correct cookware. The sym-
bol
comes on and the cooking zone
deactivates automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time,
The times of Automatic Switch Off
Heat setting
The cooking
zone deacti-
vates after
THE HEAT SETTING
Touch the control bar at the heat setting.
Change to the left or the right, if it is neces-
sary. Do not release before you have a cor-
rect heat setting. The display shows the
heat setting.
AUTOMATIC HEAT UP
12
11
10
9
8
7
6
5
4
3
2
1
0
1
2 3 4 5 6 7 8 9 10 11 12 13 14
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
illustration), and then decreases to the nec-
essary heat setting.
To start the Automatic Heat Up function for
a cooking zone:
1. Touch
(
comes on in the display).
-
6 hours
5 hours
P
comes on and the appliance deacti-
vates. See the table.
-
-
4 hours
2. Immediately touch the necessary heat
setting. After 3 seconds
in the display.
To stop the function change the heat set-
ting.
POWER FUNCTION
The Power function makes more power
available to the induction cooking zones.
The Power function is activated for 10 mi-
nutes at most. After, that the induction
cooking zone automatically sets back to
highest heat setting . To activate, touch
the indicator comes on. To deactivate,
change the heat setting.
POWER MANAGEMENT
The power management divides the power
between two cooking zones in a pair (see
the illustration). The power function increa-
ses the power to the maximum level for one
cooking zone in the pair. Automatically de-
creases the power in the second cooking
zone to a lower level. The display for the re-
duced zone change between two levels.
electrolux 7
-
1.5 hours
comes on
,
Advertisement
Table of Contents
