Installazione; Luogo Di Installazione - AEG ARCTIS G 8 72 50 i Operating And Installation Manual

Integrating freezer
Table of Contents

Advertisement

What to do if ...
Correcting Malfunctions
A malfunction may be caused by only a minor fault that you can rectify
yourself using the following instructions. Do not perform any other work on
the appliance if the following information does not provide assistance in
your specific case.
Warning! Repairs to refrigerators/freezers may only be performed by
qualified service engineers. Improper repairs can give rise to significant
hazards for the user. If your appliance needs repairing, please contact your
specialist dealer or our Customer Service.
Malfunction
Appliance is not switched on Switch on the appliance.
Mains plug is not plugged in
or is loose.
Appliance does not work, no
pilot light is illuminated.
Fuse has blown or is defective.
Socket is defective.
Green light does not light up,
yellow light lights up when
Green light faulty.
fast freeze fuction is activa-
ted, appliance is on.
Yellow light does not light up,
when fast freeze fuction is
Yellow light faulty.
activated, appliance is on.
Appliance cools too much.
Temperature is set too cold.
Temperature is not properly
adjusted.
Door was open for an exten-
The freezer temperature is not
ded period.
sufficient, red light lights up,
temperature signal sounds
A large quantity of warm
food was placed in the
appliance within the last 24
hours.
34
Possible Cause
Remedy
Insert mains plug.
Check fuse, replace if neces-
sary.
Mains malfunctions are to be
corrected by an electrician.
Please inform your customer
service
Please inform your customer
service
Turn the temperature regula-
tor to a warmer setting tem-
porarily.
Please look in the "Initial Start
Up" section.
Open the door only as long as
necessary. Press the fast free-
ze switch
Press the fast freeze switch

Installazione

Luogo d'installazione
L'apparecchio deve essere collocato in un luogo ben aerato ed asciutto.
La temperatura ambientale ha un notevole effetto sul consumo di corren-
te.
Pertano l'apparecchio dovrebbe
– non essere esposto direttamente ai raggi solari;
– non essere messo accanto ad elementi di calore oppure ad un forno o altre
simili fonti di calore;
– essere messo in un luogo la cui temperatura ambientale corrisponda alla
classe climatica per la quale é stato concepito.
La classe climatica é riportata sulla targhetta matricola situata a sinistra nel-
l'interno della cella refrigerante.
La seguente tabella mostra quali temperature ambiente sono state asse-
gnate alle classi climatiche:
Classe climatica
SN
N
ST
T
Nel caso sia inevitabile effettuare l'installazione accanto ad un fonte di calo-
re, é necessario mantenere le seguenti distanze minime:
– dai forni elettrici 3 cm;
– dai forni a nafta e carbone 30 cm.
Nel caso non possano essere mantenute queste distanze, é necessario inse-
rire una piastra di protezione contro il calore tra il forno e l'apparecchio
refrigerante.
Se l'apparecchio refrigerante è posto accanto ad un altro apparecchio refri-
gerante oppure congelante é necessario mantenere una distanza laterale di
5 cm, allo scopo di evitare che si possa formare della condensa sui lati ester-
ni degli apparecchi.
per temperature ambientali di
+10 fino +32 °C
+16 fino +32 °C
+18 fino +38 °C
+18 fino +43 °C
7

Advertisement

Chapters

Table of Contents
loading

Table of Contents