Table of Contents
Advertisement
Temperature display
The temperature display can indicate several pieces of information.
•
During normal operation, the temperature currently present in the fridge
(ACTUAL temperature) is displayed.
•
When the temperature is being adjusted a flashing display indicates the
fridge temperature currently set (DESIRED temperature).
Starting Up - Setting the Temperature
1.
Plug the mains plug into the mains socket.
2.
Press ON/OFF button (B). The green mains pilot indicator illuminates. Alarm
reset light (H) flash, since the internal tempertura will be reached. A buzzer
will sound.
3.
Press either the „+" (C) or „-" (E) button. The temperature display switches
over and the DESIRED temperature currently set flashes on the temperatu-
re display.
4.
Set the required temperature by pressing the „+" (C) or „-" (E) buttons (see
section "Temperature setting buttons"). The temperature display will imme-
diately show the changed setting. Each time the button is pressed the tem-
perature is adjusted by 1 °C.
From a food safety point of view -18 °C should be considered sufficiently
cold for storing food in the freezer.
4.
After the temperature has returned to normal, the buzzer stopped.
Pressthe alarm button the alarm reset light goes out.
Ice pack
There could be one or more ice packs in one drawer of the freezer.
In the event of a power failure or malfunction, the ice pack will lengthen
the amount of time it takes for the frozen food to become too warm by
several hours. The ice pack can only fulfil this task optimally if it is placed in
the uppermost drawer, at the front, above the frozen food. You can use the
ice pack for cooling cold bags.
FROSTMATIC
The FROSTMATIC function accelerates the freezing of fresh food and, at the
same time, protects foodstuffs already stored from undesirable warming.
1.
The FROSTMATIC function is switched on by pressing the FROSTMATIC but-
ton. The yellow light illuminates.
If the FROSTMATIC function is not ended manually, the appliance electro-
nics switch off the FROSTMATIC function after 24 hours. The yellow light
goes out.
28
Calendario di congelamento
• I simboli sui cassetti indicano diversi tipi di prodotti da congelare.
• Le cifre indicano il periodo di
immagazzinaggio in mesi per
ciascun tipo di prodotto da con-
gelare. Se é valido il valore supe-
riore oppure quello inferiore del
periodo di immagazzinaggio
indicato, dipende dalla qualità
dei prodotti alimentari e dal
proprio pretrattamento prima
del congelamento. Per gli ali-
menti notevolmente grassi vale
sempre il valore inferiore.
Cubetti di ghiaccio
1.
Riempire a 3/4 la bacinella ghiaccio con acqua fredda e riporla nel cassetto
congelatore.
2.
Per togliere i cubetti pronti é sufficiente torcere la bacinella o metterla bre-
vemente sooto l'acqua corrente.
Attenzione! Si raccomanda di non usare utensili appuntiti o a spigoli per
staccare la bacinella eventualmente rimasta attaccata. Utilizzare la paletta
raschiabrina in dotazione.
13
Advertisement
Chapters
Table of Contents
