Use; Control Panel; Controls - Electrolux EWF 1025 Instruction Booklet

132990831 GB.qxd 17/02/2004

Use

Control panel

1 Programme chart
A programme chart is in the interior part of the
detergent dispenser drawer or together with the
instruction booklet.
2 Programme selector dial
The selector dial is divided into following sections:
• Cotton, linen (blue section)
• Synthetics (green section)
• Delicates, handwash, wool, silk and mini-
programme, rinses, drain, spin and delicate spin
(grey section)
The selector dial can be turned either clockwise or
anticlockwise.
Position E corresponds to the ENERGY SAVING
programme for cotton and position O to Reset
programme/Switching OFF of the machine.
At the end of the programme the selector dial must
be turned to position O, to switch the machine OFF.
3 Temperature button
Press this button repeatedly to increase or
decrease the temperature, if you want your laundry
to be washed at a temperature different from the
one proposed by the washing machine.
Maximum temperatures are 95°C for cotton, 60°C
16:49 Pagina 8
for coloured cotton and synthetic fabrics, 40°C for
delicate fabrics, wool and fabrics to be hand-
washed, 30°C for silk and «Miniprogramme», while
corresponds to cold wash.
4 Spin Speed button
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
speed different from the one proposed by the
washing machine. The relevant light will light up.
Maximum speeds are:
• for cotton: 1000 rpm for model EWF 1025
1200 rpm for model EWF 1225;
1000 rpm for model EWF 1020;
• for synthetic, wool, and fabrics to be handwashed:
0900 rpm
• for delicate, silk fabrics, miniprogramme:
0700 rpm
Rinse hold position : When you choose this
option, the machine will not drain the water of the last
rinse, so as not to wrinkle the laundry.
At the end of the programme, the light of the
START/PAUSE button goes off, the pilot lights
and
remain lit, to indicate that the water must be
drained. To empty out water there are 2 possibilities:
• Select programme (draining):
The water is emptied out without spinning.
Attention! Before selecting programme
selector dial has to be positioned on 0 (cancelling).
• Select programme or
speed by means of the relevant button and then
depress the START/PAUSE button. The water is
emptied out and the laundry is spun at the
selected spin speed.
5 Programme option buttons
8
the
. Select the spin