Installation - Electrolux EWF 8020 W/ EWF 10020 W User Manual

Installation

Transit security bars
Before starting the machine up, the
transport security bars must be
removed as follows:
You are advised to keep all the transport
security bars. In case the appliance has
to be transported again.
P0287
1. Unscrew and remove the three rear
screws by means of a key.
P0018
2. Lean the appliance back on the rear
and fit one of the polystyrene angles
between the appliance and the floor.
Make sure the hoses are not
squashed.
installation electrolux 63
1
2
AL009
3. Carefully remove the plastic bags on
the left and the right, pulling them to
the centre of the appliance.
P0001
4. Place the machine in an upright
position and remove the three plastic
bolts.
P0002
5. Plug the 3 holes with the plastic plugs
which you can find in the envelope
containing the instruction booklet.