Advertisement
Other Operations
Using the display
Playing tracks/MP3 files in random
order
(Shuffle Play)
You can check information about the CD using the
display.
You can play tracks/MP3 files in random order.
1
Press CD
on the unit.
Checking the information of an audio CD
"CD" appears in the display.
2
To check the total track number and playing
Press MODE
until "SHUF" appears in the display.
time of the CD
3
Press on the unit ( on the remote)
Press
to stop the CD playback.
Shuffle Play.
To cancel Shuffle Play
Stop playing first. Then press MODE
disappears from the display.
Tips
Total track number
During Shuffle Play, you cannot select the previous track/MP3 file by
pressing
.
Total playing time
The resume function does not work during Shuffle Play.
Checking the information of an MP3 disc
Creating your own program
To check the total folder number on the CD
Press
to stop the CD playback.
Play)
You can arrange the playing order of up to 25 tracks/MP3
files on a CD.
1
Press CD
on the unit.
"CD" appears in the display.
Total folder number
2
Press MODE
until "PGM" appears in the display.
3
Press
or
to select the track/MP3 file,
To check file information
and then press DISP/ENT/MEMORY
Press DISP/ENT/MEMORY
on the unit while playing
the program.
an MP3 disc. The display changes as follows:
Repeat to program other tracks in the order that you
want.
The current file number and playing time
After programming the first track, "STEP 1" appears,
followed by selected track/MP3 file.
The song title ( )*
Each time you add a track/MP3 file, the step number
increments by one.
The artist name ( )
Audio CD (Program Play)
Total playing time of the selected track
The album name ( )*
* If the file does not have ID3 information, file name or folder name
appears in the display.
Playing tracks/MP3 files repeatedly
Programmed track number
MP3 disc (Program Play)
(Repeat Play)
You can play tracks/MP3 files repeatedly in normal,
shuffle or program play modes.
1
Press CD
on the unit.
"CD" appears in the display.
Programmed file number
2
Proceed as follows.
4
Press
on the unit ( on the remote)
To repeat
Do this
Program Play.
a single track/
1 Press REPEAT
on the unit until
MP3 file
"
1" appears.
To cancel Program Play
2 Press
or
to select the
Stop playing first. Then press MODE
track/MP3 file that you want to
disappears from the display.
repeat.
3 Press
on the unit (
on the
To delete the last track of the program
remote)
.
Press CLEAR
on the remote while the unit is stopped.
all tracks/MP3
1 Press REPEAT
on the unit until
Tips
files on the CD
" " appears.
You can play the same program again, since the program is saved
2 Press
on the unit (
on the
until you open the CD compartment.
remote)
.
You can record your own program. After you've created the
program, insert a blank tape and press
a selected
1 Press REPEAT
on the unit until
recording.
folder (MP3
" " and " " appear.
The resume function does not work during Program Play.
disc only)
2 Select the folder by pressing
+ or
– (FOLDER + or – on the remote)
.
Presetting radio stations
3 Press
on the unit (
on the
remote)
.
You can store radio stations into the unit's memory. You
tracks/MP3
1 Start Shuffle Play (see "Playing tracks/
can preset up to 30 radio stations, 20 for FM and 10 for
files in
MP3 files in random order").
AM in any order.
random order
2 Press REPEAT
on the unit until
1
Press RADIO
repeatedly on the unit to select the
"SHUF" and " " appear.
band.
3 Press
on the unit (
on the
2
Hold down RADIO
on the unit for 2 seconds until
remote)
.
"AUTO" flashes in the display.
MP3 files in a
1 Start Folder Shuffle Play (see "Playing
3
Press DISP/ENT/MEMORY
selected folder
tracks/MP3 files in random order").
The stations are stored in memory from the lower
in random
2 Press REPEAT
on the unit until
frequencies to the higher ones.
order (MP3
" ", "SHUF" and " " appear.
disc only)
3 Press
on the unit (
on the
If a station cannot be preset automatically
remote)
.
You need to preset a station with a weak signal manually.
programed
1 Program tracks/MP3 files (see
1
Press RADIO
repeatedly on the unit to select the
tracks/MP3
"Creating your own program").
band.
files
2 Press REPEAT
on the unit until
2
Tune in a station you want.
" " and "PGM" appear.
3 Press
on the unit (
on the
3
Hold down DISP/ENT/MEMORY
remote)
.
2 seconds until the preset number flashes in the
display.
4
Press PRESET + or –
on the unit until the preset
To cancel Repeat Play
number you want for the station flashes in the
Press REPEAT
on the unit until " " disappears from
display.
the display.
5
Press DISP/ENT/MEMORY
The new station replaces the old one.
On the remote
Playable/Recordable USB devices
1
Press BAND
until the band you want appears in
the display.
You can use the following Sony USB devices on this unit.
2
Tune in a station you want.
Other USB devices are not playable/recordable on this
3
Hold down the number buttons
that you want to
unit.
preset the new station on for about 2 seconds.
Verified Sony digital music player (as of
To select a one-digit preset number, hold down the
number for about 2 seconds.
January 2007)
To select a two-digit preset number, press the first
to start
digit, and then hold down the second digit for about 2
Product name
seconds.
Walkman
(Example)
until "SHUF"
For preset number 1: Hold down 1
for about 2
Verified Sony USB storage media (as of
seconds.
For preset number 12: Press 1
, and then hold down
January 2007)
2
for about 2 seconds.
Product name
Tip
The preset radio stations remain in memory even if you unplug the
MICROVAULT
AC power cord or remove the batteries.
(Program
Playing preset radio stations
1
Press RADIO
repeatedly on the unit to select the
band.
2
Press PRESET + or –
on the unit to tune in the
stored station.
Check the websites below for the latest information about
compatible devices.
On the remote
For customers in Europe:
1
Press BAND
repeatedly to select the band.
<http://sonydigital-link.com/dna>
to add it to
For customers in Latin America:
2
Press the number buttons
to tune in the stored
<http://www.sony-latin.com/pa/info>
station.
For customers in Asia and Oceania:
(Examples)
<http://www.css.ap.sony.com/>
For preset number 1: Press 1
, and then ENTER
.
For preset number 12: Press 1, 2
, and then ENTER
Notes
When formatting the above models, be sure to format using the
.
model itself or the dedicated formatting software for that model.
Otherwise, you may be unable to record the USB device properly on
this unit.
Falling asleep to music
Do not use USB devices other than these USB devices. Operation of
models not listed here is not guaranteed.
Operation may not always be ensured even when using these USB
1
Play the music source you want.
devices.
Some of these USB devices may not be available for purchase in
2
Press SLEEP
to display "SLEEP".
certain areas.
3
Press SLEEP
to select the minutes until the unit
goes off automatically.
Each time you press the button, the indication changes
as follows:
"AUTO*" "60MIN" "30MIN" "20MIN"
"10MIN" "OFF".
* When you select "AUTO", the CD stops playing in 90 minutes at
most and the unit goes off automatically. When you are listening
to the radio, the radio goes off in 90 minutes.
If 4 seconds have passed after you pressed SLEEP
,
the minutes in the display are entered.
When the preset time has passed, the unit goes off
automatically.
to start
To cancel the sleep function
Press OPERATE
or SLEEP
to turn off the power.
until "PGM"
Note
When you are playing a tape using this function:
If the tape length of one side is longer than the set time, the unit will
not go off until the tape reaches the end.
Recording a single track or MP3 file
to a USB device during playback
on the unit to start
REC1 Recording
This procedure allows you to easily record the currently
playing track or MP3 file to a USB device. See also
"Synchro Recording" in "Recording from a disc to a USB
device" on the front page.
1
Connect a USB device with recording capability to
the
(USB) port
.
2
Press CD
and insert the disc with the track or
MP3 file that you want to record.
3
Select the track or MP3 file and start playing it.
4
Press CD-USB SYNC/REC1
on the unit while the
selected track or MP3 file is playing.
on the unit.
"REC" flashes and the display cycles through "REC 1",
"FREExxxM"* (free space on the USB device) and
"PUSH ENT". The USB device changes to recording
standby and the unit to play pause.
* If the unit of the free space capacity is giga-byte, "FREExxxG"
will be displayed.
5
Press DISP/ENT/MEMORY
on the unit (or ENTER
on the remote).
Recording starts.
When recording is completed, the CD player
on the unit for
continues to play.
To stop recording
Press
.
on the unit.
Precautions
Discs that this unit CAN play
Audio CD
CD-R/CD-RW (CD-DA*/MP3 files)
* CD-DA is the abbreviation for Compact Disc Digital Audio. It is a
recording standard used for Audio CDs.
Discs that this unit CANNOT play
CD-R/CD-RW other than those recorded in music CD
format or MP3 format conforming to ISO9660 Level 1/
Level 2 or Joliet
CD-R/CD-RW of poor recording quality, CD-R/CD-RW
Model name
that has scratches or are dirty, or CD-R/CD-RW recorded
NWD-B103/B103F/B105/B105F
with an incompatible recording device
CD-R/CD-RW which is finalized incorrectly
Notes on discs
Before playing, clean the CD with a cleaning cloth.
Wipe the CD from the center out. If there is a scratch,
Model name
dirt or fingerprints on the CD, it may cause tracking
USM512EX / 1GEX / 2GEX
error.
USM128J / 256J / 512J / 1GJ /
2GJ / 4GJ
USM512JX / 1GJX / 2GJX / 4GJX
USM256H / 512H / 1GH / 2GH /
4GH
Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for vinyl LPs.
Do not expose the CD to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in
direct sunlight as there can be a considerable rise in
temperature inside the car.
Do not stick paper or sticker on the CD, nor scratch the
surface of the CD.
After playing, store the CD in its case.
On safety
As the laser beam used in the CD player section is
harmful to the eyes, do not attempt to disassemble the
casing. Refer servicing to qualified personnel only.
Should any solid object or liquid fall into the unit,
unplug the unit, and have it checked by qualified
personnel before operating it any further.
Discs with non-standard shapes (e.g., heart, square,
star) cannot be played on this unit. Attempting to do so
may damage the unit. Do not use such discs.
On power sources
For AC operation, check that the unit's operating
voltage is identical with your local power supply (see
"Specifications") and use the supplied AC power cord;
do not use any other type.
The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet,
even if the unit itself has been turned off.
Unplug the unit from the wall outlet when it is not used
for an extended period of time.
When the batteries are not to be used, remove them to
avoid damage that can be caused by battery leakage or
corrosion.
The nameplate indicating operating voltage, power
consumption, etc. is located at the bottom.
On placement
Do not leave the unit in a location near heat sources, in
a place subject to direct sunlight, excessive dust or
mechanical shock or in a car subject to the direct rays
of the sun.
Do not place the unit on an inclined or unstable place.
Do not place anything within 10 mm of the side of the
cabinet. The ventilation holes must be unobstructed for
the unit to operate properly and prolong the life of its
components.
Since a strong magnet is used for the speakers, keep
personal credit cards using magnetic coding or spring-
wound watches away from the unit to prevent possible
damage from the magnet.
On operation
If the unit is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lens inside the CD player section.
Should this occur, the unit will not operate properly. In
this case, remove the CD and wait about an hour for the
moisture to evaporate.
If the unit has not been used for a long time, set it in the
playback mode to warm it up for a few minutes before
inserting a cassette.
Notes on cassettes
Break off the cassette tab from side A or B to prevent
accidental recording. If you want to reuse the tape for
recording, cover the broken tab with adhesive tape.
Side A
Tab for side A
Tab for side B
The use of a cassette with more than 90 minutes of play
time is not recommended except for long, continuous
recording or playback.
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder, or
solvent, such as alcohol or benzine.
If you have any questions or problems concerning your
unit, please consult your nearest Sony dealer.
Tape player
Troubleshooting
The tape does not move when you press an
operation button.
General
Close the cassette compartment securely.
The button
does not function or the tape
The power is not on.
does not play or record.
Connect the AC power cord to the wall outlet securely.
Make sure the safety tab on the cassette is in place.
Make sure the batteries are inserted correctly.
Replace all the batteries with new ones if they are weak.
Poor or distorted playback, recording or
You cannot turn on the unit with the remote when you
erasing quality.
operate the unit on batteries.
Clean the heads by using dry- or wet-type cleaning
cassette (available separately) after every 10 hours of
The power is not on, and "BATTERY" and
use, before you start an important recording, or after
"ERROR" are displayed alternately.
playing an old tape. Failure to clean the tape heads can
Make sure the batteries are inserted correctly.
cause degraded sound quality or an inability of the unit
Replace all the batteries with new ones if they are weak.
to record or play tapes. For details, refer to the
instructions of the cleaning cassette.
There is no audio.
The TYPE II (high position) or TYPE IV (metal) tape is
Unplug the headphones when listening through
being used. Use TYPE I (normal) tape only.
speakers.
Demagnetize the heads using a commercially available
tape head demagnetizer.
Noise is heard.
Replace all the batteries with new ones if they are weak.
Someone is using a portable telephone or other
equipment that emits radio waves near the unit.
USB device
Move the portable telephone, etc., away from the unit.
Recording to an USB device cannot be started.
CD/MP3 player
The following problems may have occurred.
– The USB device is full.
The CD does not play or "NO DISC" is displayed
– The number of MP3 files and folders on the USB
even when a CD is in place.
device has reached the maximum limit.
Place the CD with the label surface up.
– The USB device is write-protected.
Clean the CD.
Take out the CD and leave the CD compartment open
Recording stopped before completion.
for about an hour to dry moisture condensation.
You are using an unsupported USB device. See
The CD-R/CD-RW is blank.
"Playable/Recordable USB devices" (on this page) for
There is a problem with the quality of the CD-R/
the supported device types.
CD-RW, recording device or application software.
The USB device is not formatted correctly. Refer to the
Replace all the batteries with new ones if they are weak.
USB device operation manual for details on how to
format the USB device.
The sound drops out.
Turn off the unit and remove the USB device. If the
Reduce the volume.
USB device has a power switch, turn the USB device off
Clean the CD, or replace it if the CD is badly damaged.
and then on again after removing it from the unit. Then
perform recording again.
Place the unit in a location free from vibration.
If recording and erase operations are repeated several
Clean the lens with a commercially available blower.
times, the file structure within the USB device becomes
The sound may drop out or noise may be heard when
complex. Refer to the USB device operation manual for
using poor quality CD-Rs/CD-RWs or if there is a
details on how to deal with this problem. If the problem
problem with the recording device or application
persists, contact your nearest Sony dealer.
software.
Recording to a USB device results in an error.
Starting playback takes more time than usual.
You are using an incompatible USB device. See
The following discs take a longer time to start playback.
"Playable/Recordable USB devices" for a list of the
– a disc recorded with a complicated tree structure.
devices that are supported.
– a disc that has not been finalized (a disc to which data
Turn off the unit and remove the USB device. If the
can be added).
USB device has a power switch, turn the USB device off
– a disc that has many folders or non-MP3 files.
and then on again after removing it from the unit. Then
perform recording again.
Radio
The USB device was disconnected or the power was
turned off during recording. Delete the partially
Reception is poor.
recorded file and record it again. If this does not solve
Reorient the antenna to improve FM reception.
the problem, the USB device may be broken. Refer to
the USB device operation manual for details on how to
deal with this problem. If the problem persists, contact
your nearest Sony dealer.
MP3 files or folders on the USB device cannot
be erased.
Check whether the USB device is write-protected or
not.
The USB device was disconnected or the power was
turned off during the erase operation. Delete the
partially-erased file. If this does not solve the problem,
Reorient the unit itself to improve AM reception.
the USB device may be broken. Refer to the USB device
operation manual for details on how to deal with this
problem. If the problem persists, contact your nearest
Sony dealer.
Are you using a compatible USB device?
If you connect an incompatible USB device, the
following problems may occur. See "Playable/
The audio is weak or has poor quality.
Recordable USB devices" for a list of the device that are
supported.
Replace all the batteries with new ones if they are weak.
– The USB device is not recognized.
Move the unit away from the TV.
– File or folder names are not displayed on this unit.
If you are using the remote while listening to AM radio,
noise may be heard.
– Playback is not possible.
– The sound skips.
The picture of your TV becomes unstable.
– There is noise.
If you are listening to an FM program near the TV with
– The sound output is distorted.
an indoor antenna, move the unit away from the TV.
– Recording stops before completion.
"OVER CURRENT" appears.
An abnormal level has been detected in the electrical
current from the
(USB) port
and remove the USB device from the
Make sure there is no problem with the USB device. If
this message persists, contact your nearest Sony dealer.
There is no sound.
The USB device is not connected correctly. Turn off the
unit and reconnect the USB device. Then turn on the
unit and check whether the "USB MEMORY" lights up
or not in the display.
There is noise, skipping, or distorted sound.
Turn off the unit and reconnect the USB device. Then
turn on the unit again.
The music data itself contains noise, or the sound is
distorted. Noise may have entered during the recording
process. Delete the file and try recording it again.
The USB device cannot be connected to the
(USB) port
.
The connector on the USB device or USB cable was not
correctly oriented when the connection was attempted.
Connect the connector on the USB device or USB cable
in the correct orientation.
"READING" is displayed for an extended time,
or it takes a long time before playback starts.
The reading process can take a long time in the
following cases:
– There are many folders or files on the USB device.
– The file structure is extremely complex.
– The memory is almost full.
– The internal memory is fragmented.
To avoid the above problems, we recommend that you
adhere to the following guidelines:
– Keep the total number of folders on USB device to
100 or less
– Keep the total number of files per folder to 100 or less.
Erroneous display
The data stored on the USB device may be corrupted.
Send the music data to the USB device again.
This unit can display only numbers and letters of the
alphabet. Other characters will not be displayed
correctly.
The USB device is not recognized.
Turn off the unit and reconnect the USB device, then
turn on the unit.
Connect the supported USB device (See "Playable/
Recordable USB devices" (on this page) for the
supported device types.).
The USB device does not work properly. Refer to the
USB device operation manual for details on how to deal
with this problem. If the problem persists, contact your
nearest Sony dealer.
Play does not start.
Turn off the unit and reconnect the USB device.
Connect a USB device that this unit can play (see
"Playable/Recordable USB devices").
Play does not start from the first track.
Set the play mode to Normal Play.
MP3 files cannot be played back.
The MP3 files do not have the ".MP3" extension.
The data was not stored in the MP3 format.
The USB storage device uses a file system other than
FAT16 or FAT32.*
The USB storage device is partitioned. Only the MP3
files in the first partition can be played.
Playback is possible up to 8 levels.
The number of folders has exceeded 999.
The number of files has exceeded 999.
The files are encrypted or protected by passwords.
* This unit supports FAT16 and FAT32, but some USB storage media
may not support both file systems.
For details, refer to the operation manual of the USB storage device
in question or contact the manufacturer.
Remote
The remote does not function.
Replace all the batteries in the remote with new ones if
they are weak.
Make sure that you are pointing the remote at the
remote sensor on the unit.
Remove any obstacles in the path of the remote and the
unit.
Make sure the remote sensor is not exposed to strong
light such as direct sunlight or fluorescent lamp light.
Move closer to the unit when using the remote.
After trying the remedies, if you still have problems,
unplug the AC power cord or remove all the batteries.
After all the indications in the display disappear, plug the
AC power cord or insert the batteries again. If the
problem persists, please consult your nearest Sony dealer.
. Turn off the unit
(USB) port
.
Advertisement
