Download Print this page

Controls And Connections; Fcc Caution - X10 VR47A Owner's Manual

Video receiver for use with x10 wireless camera systems

Advertisement

I
NTRODUCTION
X10's wireless cameras use 900 Megahertz wireless technology to transmit
live video through walls to a television up to 100 feet away. The Camera
converts video into wireless radio frequency (RF) signals and transmits
them to the VR47A Video Receiver which you connect to a TV anywhere
in your home. The VR47A Receiver converts the signals back to video
signals which are fed through a cable to your TV's video input jack. And
because it's 900 MHz, wireless routers will not cause interference. You get
a crystal clear picture. It's also designed so that you can combine multiple
cameras to provide comprehensive coverage of your home or business. If
you purchase additional VR47As you can view your camera(s) on more
than one TV.
FCC C
AUTION
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
This equipment generates and uses radio frequency energy, and if not installed and used
properly, that is, in strict accordance with the manufacturers instructions, it may cause
interference to radio and television reception. It has been type tested and found to comply
with the limits for remote control devices in accordance with the specifi cations in Sub-Parts
B and C of Part 15 of FCC Rules, which are designed to provide reasonable protection
against such interference in a residential installation. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
interference to radio or television reception, which can be determined by unplugging the
equipment, try to correct the interference by one or more of the following measures.
Reorient the antenna of the radio/TV experiencing the interference.
Relocate the equipment with respect to the radio/TV.
Move the equipment away from the radio/TV.
Plug the equipment into an outlet on a different electrical circuit from the radio/TV
experiencing the interference.
If necessary, consult your local Dealer for additional suggestions.
NOTE: Modifi cations to this product will void the user's authority to operate this
equipment.
2
C
C
ONTROLS AND
ONNECTIONS
Video Out Jack
ON-OFF Switch
3
900 MHz
Video Antenna
Power Supply
Jack

Advertisement

loading