X10 VR31A Owner's Manual

Audio/video receiver for use with x10 wireless camera systems

Hide thumbs Also See for VR31A:

Download this manual

Audio/Video Receiver for use with

X10 Wireless Camera Systems

MODEL VR31A OWNER'S MANUAL

Table of Contents

Page 1 Audio/Video Receiver for use with X10 Wireless Camera Systems MODEL VR31A OWNER'S MANUAL...
Page 2: Controls And Connections
NTRODUCTION The VR31A Audio/Video Receiver works with X10's Wireless Cameras. The Camera converts video and sound into wireless radio frequency (RF) signals and transmits them (even through walls) to the Audio/Video Receiver which you connect to a TV anywhere in your home (up to 100 ft.
Page 3 ONNECTING 1. Connect a set of Audio/Video cables to the A/V OUT jacks on the Audio/Video Receiver. Connect the other end to TO TV your TV (use Yellow for video, and either L or R channel for audio). 2. Plug the Audio/Video Receiver's Power Supply jack (the power supply with NO code wheels) into the Audio/Video Receiver and plug the power supply...
Page 4: Troubleshooting
ROUBLESHOOTING If you do not see a picture on your TV: Check that the Receiver and the Camera are on the same letter channel (A, B, C, or D). On the Receiver the switch is on the bottom. On the Camera the switch is located under the rubber plug on the base of the unit.
Page 5: 12 Month Limited Warranty
ONTH IMITED ARRANTY X10.COM A DIV. OF X10 WIRELESS TECHNOLOGY, INC. (X10) WARRANTS ITS PRODUCTS TO BE FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE (1) YEAR FROM THE ORIGINAL DATE OF PURCHASE AT RETAIL. X10 AGREES TO REPAIR OR REPLACE, AT ITS SOLE DISCRETION, A DEFECTIVE X10 PRODUCT IF RETURNED TO X10 WITHIN THE WARRANTY PERIOD AND WITH PROOF OF PURCHASE.