Further Information - C-SCOPE PROMET3 Operating Instructions Manual

The Detector Drifts out of Tune
(a) Temperature drift caused by the change in air temperature when a
machine is moved from a house or a car into the open.
(b) The greater the change in temperature the more the drift, and up to 30
minutes may be needed for the electronic circuitry to acclimatize itself.
(c) Sometimes battery drain can cause drift of signal. Replace batteries and
this should help to maintain a stable signal.
If you experience any difficulty in operating your PROMET 3, or have any
questions on the information in your PROMET 3 Operating Instructions
FURTHER
INFORMATION
manual, please do not hestitate to phone our Customer Services Department
on (0233) 629181.
Before returning
a
detector for repair to C-Scope ensure you have
done the following:­
(a) Read instructions thoroughly.
(b) Tried new batteries and checked procedure outlined above.
(c) Speak to local dealer about performance of the detector, especially
if you are still unfamiliar with metal detectors in general.
Return detector with letter giving full details of fault.
;..
I
...
11