What To Do If; Correcting Malfunctions - AEG SANTO 72358 KA Operating Instructions Manual

What to do if ...

Correcting Malfunctions

A malfunction may be caused by only a minor fault that you can rectify
yourself using the following instructions. Do not perform any other
work on the appliance if the following information does not provide
assistance in your specific case.
Warning! Repairs to refrigerators may only be performed by qualified
1
service engineers. Improper repairs can give rise to significant hazards
for the user. If your appliance needs repairing, please contact your spe-
cialist dealer or our Customer Service.
Malfunction
Appliance does not work,
temperature display is not
lit.
Appliance cools too much.
The food is too warm.
818 22 30-01/4
Possible Cause
Appliance is not switched
on.
Mains plug is not plugged
in or is loose.
Fuse has blown or is defec-
tive.
Socket is defective.
Temperature is set too cold.
Temperature is not properly
adjusted.
Door was open for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
The appliance is near a
heat source.
Remedy
Switch on the appliance.
Insert mains plug.
Check fuse, replace if nec-
essary.
Mains malfunctions are to
be corrected by an electri-
cian.
Set the temperature to a
warmer setting temporar-
ily.
Please look in the
"Temperature Adjustment"
section.
Open the door only as long
as necessary.
Press the COOLMATIC but-
ton or set the temperature
to a colder setting tempo-
rarily.
Please look in the "Installa-
tion Location" section.
25