Temperature Adjustment; Switching The Appliance Off - AEG SANTO 72358 KA Operating Instructions Manual

Refrigerator
Hide thumbs Also See for SANTO 72358 KA:
Table of Contents

Advertisement

Temperature Adjustment

With the buttons for temperature adjustment the desired temperatures
in the refrigerator can be adjusted.
0
1. Press either the „+" (WARMER) or „-" (COLDER) button.
The temperature display switches over and the DESIRED temperature
currently set flashes on the temperature display.
2. To adjust to a warmer temperature, press the „+" (WARMER) button. To
adjust to a colder temperature, press the „-" (COLDER) button. The
changed setting is immediately displayed on the temperature display.
Each time the button is pressed the temperature is adjusted by 1 °C.
Adjustable temperature range: +2 °C to +8 °C, +15 °C (Holiday mode)
Note: From a food science point of view, +5 °C for the refrigerator
compartment should be considered cold enough as a storage
temperature.
3
When the buttons are not further pressed after an adjustment has been
made, after a short period (approx. 5 sec.) the temperature display swit-
ches over and again displays the ACTUAL temperature in the refrigera-
tor. The display changes from flashing to continuous illumination.
The compressor will start and then run automatically.
Information! When the setting is changed, the compressor does not
start immediately if automatic defrosting is currently taking place.
3
Goods to be refrigerated can be loaded immediately after switching on,
because the storage temperature in the refrigerator is quickly reached.

Switching the Appliance off

0
1. To switch off, hold down the ON/OFF button for approx. 5 seconds. This
will result in a countdown from "3" to "1" taking place in the tempera-
ture display. On reaching "1" the fridge will switch off. The temperature
display will go off.
Note:
The appliance cannot be switched on or off if unplugged, or if there is
no power being supplied to it.
Following connection to the mains power supply, the appliance returns
to the same operating state as before the interruption of main power.
16
818 22 30-01/4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Santo

Table of Contents