Table of Contents
Advertisement
Adaptation to different types of gas
Replacing the injectors
1. Remove the pan supports.
2. Remove the burner caps and crowns.
3. Using a 7 mm socket spanner
and remove the
them with the ones required for the new
type of gas
characteristics").
4.
Reassemble the parts, following the
same procedure backwards.
5. Replace the Gas Type Label (located
near the gas supply connection) with the
one corresponding to the new type of
gas. The label is supplied in the
accessories plastic bag.
Should the feeding gas pressure be different
or variable compared with the required
pressure, an appropriate pressure regulator
must be fitted on the gas supply pipe, in
compliance with the rules in force.
unscrew
injectors,
then replace
(see table "Burner
2 9
Advertisement
Table of Contents
