Switching The Outside Ring On And Off - AEG Electrolux 79331KF-N User Manual

Switch off

Switching the outside ring on and off

By switching the outside rings on or off, the effective heating surface can be matched to
the size of the cookware.
Before an outside ring can be switched on, the inside ring must be switched on
Triple cooking zone
To switch on the central ring
To switch on the outside ring
To switch off the outside ring
To switch off the central ring
Multi-purpose zone
To switch on outside ring
To switch off outside ring
Locking/unlocking the control panel
The control panel, with the exception of the "On/Off" sensor field, can be locked at any time
in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
To switch on
To switch off
When you switch the appliance off, the locking function is automatically switched off.
Turning the STOP+GO function on and off
The STOP+GO function simultaneously toggles all active cooking zones to keep-warm mode
then back to the heat setting they were at before
To switch on
To switch off
STOP+GO does not stop timer functions.
STOP+GO controls the entire control panel apart from the sensor field
Control panel
Touch
Touch
Touch
Touch
Touch
Touch
Touch
Control panel
Touch
previously set heat setting
Touch
Control panel
Touch
Previous heat setting (not automatic warm-up or power
Touch
function)
Operating the appliance
Sensor panel
for 1-2 seconds.
for 1-2 seconds.
for 1-2 seconds.
for 1-2 seconds.
Sensor field
for 1-2 seconds
for 1-2 seconds
(for 4 seconds)
Display
Pilot light
Second pilot light lights up
Third pilot light lights up
Third pilot light goes out
Second pilot light goes out
Pilot light
Second pilot light lights up
Pilot light goes out
Display
Display
.
7