Advertisement
6
CLEANING AND MAINTENANCE
There is no special maintenance to be done on your turntable. Clean with dust free soft
cloth.
Drive wheel and motor pulley may be cleans after months of use or if abnormal speed
variation occurs.
Note: Clean with Isopropyl Alcohol only. Belt may be changed after heavy use, especially if
it becomes too hard and does not grip enough on the pulley.
WARNING!
Always turn the power off on the power supply before cleaning your turntable.
All enquires relating to product servicing and operation should be referred to the local
authorized retailer supplying and supporting your Goldmund equipment.
RUNNING-IN TIME
The Goldmund Reference II shaft and axis are machined with extreme precision. The
optimal performance can only be reached after approximately 100 hours of use, despite the
initial working period of 50 hours processed at the factory.
21
The Goldmund Reference II – Assembly manual
Advertisement
