Goldmund Reference II Turntable Assembly & User Manual page 13

STEP 13
For this step, you need to be 2 persons.
One person take carefully the motor block by its basis and keep in above the 3
holes with the golden insert, as shown on the picture.
The other person runs the cables trough the central hole and leave them hanging
Then the first person can mount the motor on the table, making each black
serrated knurl facing its golden insert.
ATTENTION:
Please check the motor and the motor black knurl is in the same position as the
one shown on the picture.
13
The Goldmund Reference II – Assembly manual