To Turn The Blinc Headset Off; Seeking Mode; To Pair The Blinc Headset With A Phone Or Another Device; Example Of Blinc Headsets Set‐Up From Pda Phone - Blinc Bluetooth Compatible Helmet User Manual

To turn the BLINC™ headset off
Press and hold the Call Handling Button (MFB) for approximately 5 seconds until
you hear a short high tone followed by a short low tone. The BLINC™ headset
indicator light switches off.

Seeking Mode

Press and hold "Multifunction button" on Bluetooth Helmet until the blue and red
indicator lights blinking. (Around 6~7 seconds)
To pair the BLINC™ headset with a phone or
another device
You need to pair the BLINC™ headset to a phone or other device.
On the phone enter the searching Bluetooth device mode and press and hold the
Call Handling Button (MFB) for approximately 5 seconds until the indicator light blue
and red on the Control Buttons flashes alternately. Operate the phone to discover and
connect the BLINC™ headset.
pairing is successful the BLINC™ headset indicator blue light flashes slowly and
indicator red light is off. Pairing should be done only once. Each time you use your
headphones, it will be automatically connected to your phone. Note: Before enter
pairing mode, please make sure other Bluetooth devices are switched off.
Example of BLINC™ Headsets Set‐Up from PDA Phone:
1
The BLINC™ headset passkey is 0000
Choose Setup
Function
. If
5