Advertisement
The Digital Signal Processor:
Crate's Digital Signal Processing offers 16 exciting digital effects, accessible through the DSP
Mode control. The effects are described below.
1
small room reverb
2
medium room reverb
3
large room reverb
4
concert hall reverb
5
short slapback w/small room reverb
6
medium delay w/plate reverb
7
long delay w/large room reverb
8
slow deep flange w/reverb
9
flange w/reverb & delay
10
slow tremolo chorus w/reverb
11
chorus w/reverb & delay
12
rotating speaker
13
octave down
14
touch wah
15
inverse wah
16
doubler
Channel Tracking:
Your Crate GTX65 gives you the power of Channel Tracking! Once you select a DSP setting for
each channel, Channel Tracking recalls those DSP settings automatically – without changing the
DSP controls! For example:
• Select the Clean channel. Set the DSP Mode to "8"
• Select the Rhythm/Solo channel, Gain 1. Set the DSP Mode to "10"
(the setting for the Clean channel is now saved to memory)
• Select the Rhythm/Solo channel, Gain 2. Set the DSP Mode to "14"
Rhythm/Solo channel, Gain 1 is now saved to memory)
• Reselect the Clean channel
Now when you go back to the Clean channel, even though the DSP Mode was last set to "14"
(touch wah), Channel Tracking automatically recalls the last setting for the Clean channel – in this
example, "8" (slow flange). Change to the Rhythm/Solo channel, Gain 1, and "10" (chorus) is
recalled. Change to the Rhythm/Solo channel, Gain 2, and "14" (touch wah) is recalled. That's the
power of Channel Tracking!
(Note: Even when the power is turned off, Channel Tracking still retains the settings – until you change them!)
GTX65
DSP
(slow deep flange w/reverb)
(the setting for the Rhythm/Solo channel, Gain 2 is now saved to memory)
Guitar Amplifier
C
T
hannel
&
Use the DSP Mode control to access
any of the 16 built-in digital effects.
Use the Level control to mix in the
desired amount of each effect.
(slow tremolo chorus w/reverb)
(the setting for the
(touch wah)
with
racking
3
Advertisement
