Authenticating The Password To Use - Buffalo HDS-PHU2 Series User Manual

3
* Copy and Paste are disabled for password and hint entry.
4
When the [Password Security enabled successfully.] message appears, click
[OK].
5
Disconnect the device from the computer.
Password is changed.
III Authenticating the Password to Use
Authenticate the password and prepare the device to read and write data.
1
Connect this device to the computer.
2
Double-click
3
HDS-PHU2 Series User�s Manual
10
[Secure Disk Tool] on the desktop.
1 Enter the current password.
* Enter [12345] (factory setting) when you use
this device for the first time.
2 Enter a new password (4 to 10 characters)
in 2 places.
3 Enter a hint phrase (5 to 75 characters).
4 Click [OK].
1 Enter the password.
2 Click [Authenticate].
* When you enter wrong passwords 3 times, you
can check the hint phrase you entered from the
[Hint] button.
Continued