Chevrolet 2011 Volt Collision Awareness Manual page 15

Hide thumbs Also See for 2011 Volt:

Table of Contents

Air Bag Repairs and Inspections Required After a

Collision (cont.)

After a collision involving driver/passenger side seat air bag deployment, replace the following components.

• Left/right side impact sensors on the side of the impact.

• Left/right roof rail air bag on the side of the impact.

• Inflatable restraint sensing and diagnostic module (SDM), if SDM has DTC B0052 56.

• Inflatable restraint seat belt anchor and/or retractor pretensioner.

• Driver or passenger seat back cushion cover replacement.

Warning: Do not repair or replace the seat stitching or seams in the seat back trim cover with an internal mounted seat side

airbag module. Replace the complete seat back trim cover from the OEM. Non-OEM seat stitching may cause improper

airbag deployment which could result in personal injury.

Perform additional inspections on the following components.

• The seat cushion frame

• The seat recliner and cover, if equipped

• The seat adjuster

• The seat back frame

• Door trim assembly

• Impacted seat cushion side covers and switches

Table of Contents