Control Panel (Ice Dispenser); Before Use - AEG Electrolux ARCT IS 82968- G A1 Operating Instructions Manual

Control Panel
I
I. Yellow indicator lamp
Lights up when the locking function
has been activated.
J. Button for locking function.
Used for temporary disconnection of
the locking function and alarm
re-setting.
K. Button for night
setting/lighting.
Used for activation/deactivation of
the night setting function and to
switch the lighting and the alarm
setting on and off.

Before use

Position and clean the cabinet as
explained in the section
"Installation".
Before inserting the power plug into the outlet and switching on
the cabinet for the first time, leave it standing upright for about 4
hours. Otherwise the compressor may sustain damage. This time
will allow the oil sufficient time to return to the compressor.
(ice dispenser)
J
M
K L N
L. Photo-electric sensor.
Senses prevailing lighting conditions
(must not be covered).
M. Ice feeder
Activated when the pedal in the
feeder is fully depressed.
N. Lighting
5
AEGE 8183970-00/6