Installation; Permissible Water Pressure (To Ensure Reliable Function); Unpacking; Remove The Transport Supports - AEG Electrolux ARCT IS 82968- G A1 Operating Instructions Manual

Permissible water pressure
The total flow in the system can vary, depending on local water conditions
and/or water pressure.
Lowest permissible water
pressure. 1 bar (100kPa)
Highest permissible water
pressure. 10 bar (1MPa)
Do not connect the refrigerator in spaces where ambient temperature can
decrease to below freezing.
The refrigerator may only be connected to drinking water supplies.
The refrigerator may only be connected to cold water supplies.

Installation

Unpacking

Unpack the cabinet and check that it is in good condition and free of any
transport damage. Notify the dealer immediately of any damage. Hand the
packaging over for recycling. For more information, contact your local city
office or the dealer.
Do not allow children to play with the packaging. The plastic film can cause
suffocation.
Remove the transport
supports

Remove the transport supports

placed along the door sides.
Some models are fitted with a
silencing pad under the cabinet. Do
not remove this pad.

Cleaning

Wash the inside of the cabinet using
lukewarm water, a mild washing-up
detergent and a soft cloth.
(to ensure reliable function)
Consult your installer if water
pressure is less than 1 bar.
If water pressure exceeds 10
bar, than a reduction valve
must be fitted (available from
your specialist shop).
20
AEGE 8183970-00/6
.