Servicing And Cleaning The Ice Dispenser; To Change The Light Bulb; When The Appliance Is Not In Use - AEG Electrolux ARCT IS 82968- G A1 Operating Instructions Manual

Servicing and cleaning the ice dispenser

When necessary, clean the surfaces of the dispenser and the ice container
that are accessible from the outside, using only a soft cloth and warm water.
When necessary, the feeder and the ice container can be cleaned after
removal of the surfaces accessible from the outside, using only a soft cloth
and warm water.
Ensure that the ice container is thoroughly dry before being re-fitted.
If the system is not to be used for a long period, it is advisable to switch off
the ice machine and water supply, empty the ice container and fit the cover
supplied over the delivery hole for ice in the door. When re-starting, avoid
using the ice produced during the first day.
Defrosting
Defrosting is not necessary.
Every 24 hours, the evaporator is defrosted automatically.

To change the light bulb

The light is switched on
automatically when the door is
opened. Before replacing the light
bulb, disconnect the power plug
from the outlet.
Press the spring together and pull the
grille downward at the same time.
Use a halogen bulb of the same type;
220-240 V, E14 socket, maximum
rating of 25 W.

When the appliance is not in use

Disconnect the appliance from electricity supply.
Empty all foods and clean the appliance, leaving the doors ajar to prevent
unpleasant smells.
If the cabinet will be kept on, ask somebody to check it once in a while to
prevent the food inside from spoiling in case of a power failure.
AEGE 8183970-00/6
16