Table of Contents
Advertisement
Door reversal instructions
1
Warning! The door may only be reversed by a specialist.
If necessary, please contact your local Service Force Centre.
Warning! Before reversing the door, disconnect the mains plug; with a
permanent connection: remove the fuse.
1. Open door.
2. Unscrew hinge A from the front of
the machine and take off the door.
3. Carefully pry off cover plates B and
C. To do this, insert a thin screw-
driver into the slots as shown in the
illustration, press downwards
slightly and pry out the cover
plates.
4. Unfasten locking block D from the
snap-on fixture, take out and rein-
sert on the other side, having ro-
tated the block through 180°.
5. Unscrew hinge A from the door, ro-
tate through 180°, reinsert on the
opposite side and screw down.
6. Reinsert cover plates B and C on
the opposite site having first rotated them through 180°.
7. Unscrew cover plates E from the
front of the machine, rotate
through 180, screw on the opposite
side.
8. Unscrew door lock F, push down
slightly and remove from the front
of the machine.
9. Press snap-in button G in and down,
press cover down slightly and re-
move from front of the machine.
10. Transfer door lock F to the opposite-
side and screw down.
11. Fix cover G on to the other side and
allow the snap-in button to lock in
place.
28
Hide quick links:
Advertisement
Table of Contents
