Recording Options; Searching For Channels - Go-Video R 6640 User Manual

Recording Options

SEARCHING FOR CHANNELS

Before you can record TV programs, you must first scan for channels.
1. In STOP mode, press SETUP to access the Setup menu.
2. Use the RIGHT/LEFT keys to highlight the TUNER icon, then press ENTER.
3. Press ENTER then use the UP/DOWN arrow keys to select your input source: Air (Antenna) or Cable,
Press ENTER again to confirm.
4. Use the RIGHT/LEFT arrow keys to
highlight SCAN, then press ENTER.
The recorder will automatically
search for all available channels.
If a channel cannot be found, it
will be checked in the Skip column.
To cancel automatic channel search,
press STOP.
5. To browse the stored channels, use
the RIGHT/LEFT arrow keys to move
to CH column, then use the UP/DOWN
arrow keys to select channels.
You can also use the 0-9 keys to
select channels directly.
6. To add or delete channels use the
RIGHT/LEFT arrow keys to move to
the Skip column, then use the
UP/DOWN arrow keys to highlight
the desired channel. Press ENTER
to add or remove the check mark.
7. Press SETUP again to exit.
NOTE:
Cable channel numbers are 1-125.
Air (Antenna) channel numbers are 2-69.
SETUP
OPEN/CLOSE SETUP
RANDOM
PREV. NEXT
REW F F
ARROW
KEYS
POWER
DISPLAY
MENU
TITLE
SUBTITLE
GO TO AUDIO
PLAY PAUSE
SLOW STOP/RETURN
ENTER
ENTER
28