Bush 14 DVD-TV COMBI User Manual page 50

14" DVD/TV Combi with Remote Control
Angle Mark
The Angle Mark function allows you to turn the Angle Mark on or off. The angle mark indicates when
multiple angles are available during playback.
Standby Time
The Standby Time function allows you to turn the Standby Time on or off. When switched on, a
countdown will appear if no user action is taken after a limited amount of time. When the countdown
reaches zero, the DVD/TV will switch into standby mode. The available countdown times are 5, 15 and
35 minutes.
Default
The Default function allows you to reset the DVD Setup menus to the default factory settings.
1. Press the UP or DOWN ARROW buttons to highlight default.
2. Press the LEFT or RIGHT ARROW button to select Reset.
3. Press the SELECT button. The DVD/TV will be reset.
Downmix
The Downmix function allows you to select the analog audio output type. The available options are:
•
•
50
Surround - Creates a virtual surround sound.
Stereo - Creates a stereo sound.
Customer Helpline: 0870 873 0079