Lower spray arm
1. Undo the fixing screw (B) by turning it
anti-clockwise.
2. Pull the spray arm off the shaft.
3. Clean the spray arm and the fixing screw.
4. Fasten the spray arm with the fixing screw
(B) by turning it clockwise.
External cleaning
Clean the external surfaces of the machine and control panel with a damp soft
cloth. If necessary use only neutral detergents. Never use abrasive products, scour-
ing pads or solvent (acetone, trichloroethylene etc....).
• Polished chromium steel surfaces
Remove light dirt with a clean, damp, soft cloth. Microfibre cloths are particularly
good.
WARNING!
When cleaning ensure that you do not go against the direction of the stainless
steel finish (the fine horizontal lines).
No circular movements!
• Aluminium look surfaces
Remove light dirt with a clean, damp, soft cloth. Microfibre cloths are particularly
good.
• Agents that scratch or scour are not suitable.
• If required, use a commercially available cleaner for chrome surfaces. Follow the
manufacturer's instructions when using these products.
Internal cleaning
Ensure that the seals around the door, the detergent and rinse aid dispensers are
cleaned regularly with a damp cloth.
We recommend every 3 months to run the wash programme for heavy soiled dishes
using detergent but without dishes.
Care and cleaning
31