Maintenance - Ryobi VC30A Owner's Operating Manual

MAINTENANCE

Make sure that the appliance is not plugged into
the power mains.
Remove the suction hose from the tank.
¡ ö
Loosen the clamps and separate the upper
¡ ö
section from the tank.
Remove all the dirt and residue from the tank
¡ ö
and the hose.
Clean the foam filter by washing it with a mild
¡ ö
detergent.
Check the hoses and connections and check the
¡ ö
power cord for any damage.
When the foam filter is removed, check the float.
¡ ö
To do this, take the upper section by the handle
and tip it carefully so that the filter basket is
facing upwards. The float should move freely up
and down. (Fig. 26)
5