Resetting Factory Defaults; Contacting Magellan - Magellan Switch series User Manual

GPS
Before beginning an activity be sure that your
Switch is receiving GPS signals from the GPS
satellite constellation.
After Switch is turned on it begins searching
for signals from GPS satellites. After it acquires
enough information to compute your location,
Switch will inform you that GPS is found and
ready to record your activity.
Checking GPS Status
1. Press and hold the Down button.
2. Use the Down button to highlight
Settings.
3. Press EntEr.
4. Use the Down button to highlight "GPS
Settings". Press EntEr.
5. The last three lines of "GPS Settings"
provide information on the GPS Status,
the estimated accuracy and the number
of satellites that have been found.
6. To exit, press and hold the Down button.
Select "Activity" or "Navigation" mode
from the popup menu and press EntEr.
Checking GPS Status (Shortcut)
1. From the Activity screen, press and hold
the UP button.
2. The Quick Info screen is displayed. The
first item on the fourth line graphically
displays the GPS Status.
Searching for satellites
Satellites found, computing location
Tips on Acquiring Initial GPS Signal
• Go outdoors and get a clear view of the
sky.
• Place Switch on a stationary object with the
face of the watch facing up.
• Avoid blocking the view of the sky with
your body.
• Avoid overhanging trees and tall buildings.
Caring for Switch
• Clean the Switch display with a dry, non-
abrasive cloth.
• Regularly clean the contacts on the back
of Switch with a cotton swab dipped in
alcohol.
In Case of Problems
If you are experiencing problems with your
Switch, visit the Magellan Active web site at
active.magellangps.com/start and check the
Fitness Knowledgebase for information that
may solve your problem.
You can also try resetting the device. This will
fix most problems.
Warning: A factory reset will delete all activity
data and settings.

Resetting Factory Defaults

1. Press and hold the EntEr and Down
buttons at the same time.
2. After 5 seconds, a menu will
appear.
3. Select "Factory Reset" and
Press EntEr.

Contacting Magellan

If you are still experiencing problems
after checking the Knowledgebase and a
preforming a Factory Reset you can contact
Magellan for Customer Support. Go to
active.magellangps.com/start and click on the
Customer Support link for details on contacting
Magellan Customer Support.