Ant+™ Sensors; Supported Sensors - Magellan Switch series User Manual

Switch series crossover gps watch
Hide thumbs Also See for Switch series:
Table of Contents

Advertisement

Switch is compatible with ANT+™ sensors to provide additional information about your activity.

Supported sensors

• Heart rate
• Foot pod
• Bike speed/cadence
• Bike speed
• Bike cadence
• Power meter.
Compatibility with Activity types
Sensor
Run
Heart Rate
Foot Pod
Bike (All)
Power Meter
Settings
Speed and cadence can be provided from
multiple sensors. Switch needs to know
which sensor configuration is in use to know
where speed and cadence information will be
provided from.
Accessing ANT+ Settings
1. Press and hold the Down button.
2. Use the Down button to highlight
"Settings" and press EntEr.
3. Use the Down button to highlight
"Device Settings" and press EntEr.
4. Use the Down button to highlight "ANT+
Settings" and press EntEr.
5. Highlight the option and press EntEr.
ANT+™ Sensors
Bike
Swim
Other
Options :
• Bike Spd & Cadence - Speed and cadence
can be provided by separate sensors or by
a combined speed and cadence sensor.
Select the option that matches your
configuration.
• Bike Spd Source - Speed can be provided
from a bike speed sensor (combined or
separate) or from a power meter sensor.
Select the option that matches your
configuration.
• Bike Cad Source - Cadence can be
provided from a bike cadence sensor
(combined or separate) or from a power
meter sensor. Select the option that
matches your configuration.
Sensors
By default all sensors are disabled. Before
using an ANT+ sensor Switch needs to have
that sensor type enabled so it can begin
connecting with the sensor.
Enabling ANT+ Sensors
1. Press and hold the Down button.
2. Use the Down button to highlight
"Settings" and press EntEr.
3. Use the Down button to highlight
"Device Settings" and press EntEr.
4. Use the Down button to highlight "ANT+
Sensors" and press EntEr.
5. Highlight the sensor type and press
EntEr. (If in ANT+ Settings bike speed
and cadence is set as a combined sensor,
only "Bike Spd/Cad" is displayed. If set as
separate sensors, both "Bike Speed" and
"Bike Cadence" are displayed.}

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

SwitchSwitch up

Table of Contents