Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence.
Safety The safety aspects of our refrigerators/freezers comply with accepted technical standards and the German Appliance Safety Law. Nevertheless, we consider it our obligation to make you aware of the following safety information: Intended use • The refrigerator is intended for use in the home. It is suitable for the freezing and storing of frozen food, as well as for making ice.
the fridge when playing (there is risk of suffocation!)or get themselves into other dangerous situations. • Often children cannot recognise the hazards present in household appliances. It is therefore important that you ensure adequate supervision and never let children play with the appliance! Daily Operation •...
Disposal Appliance Packaging Information All materials are environmentally sound! They can be dumped or burned at an incinerating plant without danger! About the materials: The plastics can be recycled and are identified as follows: >PE< for polyethylene, e.g. the outer covering and the bags in the interior. >PS<...
Installation Installation Location The appliance should be set up in a well ventilated, dry room. Energy use is affected by the ambient temperature. The appliance should therefore – not be exposed to direct sunlight; – not be installed next to radiators, cookers or other sources of heat; –...
Rear spacers In the bag with the documentation, there are two spacers which must be fitted. Slacken the screws and insert the spacer under the screw head, then re-tighten the screws. Fitting the Door Handle Screw the top handle bracket to the handle rod (1).
Remove the ventilation grille. Remove the bottom hinge (A) by unscrewing the fixing screws. Remove the door. Unscrew the pin of the bottom hinge (f) and refit it on the opposite side. Unscrew the pin of the upper hinge (d) and refit it on the opposite side. Insert the door in the upper hinge and refit the upper hinges (A).
Attention: After having reversed the opening direction of the doors check that all the screws are properly tightened and that the magnetic seal adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. in that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.
Temperature setting buttons The temperature is adjusted using the „B“ and „D“ buttons. These buttons are connected to the temperature display. • The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the display of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, „B“...
Temperature display The temperature display can indicate several pieces of information. • During normal operation, the temperature currently present in the freezer (ACTUAL temperature) is displayed. • When the temperature is being adjusted a flashing display indicates the freezer temperature currently set (DESIRED temperature). Starting Up - Setting the Temperature Plug the mains plug into the mains socket.
Alarm OFF button In the event of an abnormal temperature rise inside the freezer (e.g. power cut) warning light (G) will start to flash and a buzzer will sound. After the temperature has returned to normal, the warning light (G) will continue to flash, although the buzzer has stopped.
Freezing and storing frozen food You can use your freezer for freezing fresh food yourself. Important! • The temperature in the freezer compartment must be –18 °C or colder before freezing food. • Please observe the freezing capacity given on the rating plate. The freezing capacity is the maximum quantity of fresh food that can be frozen within a period of 24 hours.
begin to defrost. Press the fast freeze button 24 hours before introducing fresh food for freezing of fresh food. The yellow light comes on. Place frozen foods in the drawers sorted by type, as far as possible. Preparation of Ice Cubes Fill the ice cube tray 3/4 full with cold water, place it in the freezer compartment and leave to freeze.
Defrosting The freezer can not be equipped with automatic defrosting set since the deep-frozen and frozen foods do not endure melting temperature. When small frost and ice occurs scrape off and remove frost and ice coating with the supplied plastic scraper. When ice coating is so thick that it cannot be removed with the plastic scraper,the cooling gill have to be defrosted.Frequency of defrosting depends on usage (generally 2-3 times a year).
Cleaning and Care For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly. Warning! • The appliance may not be connected to the mains during cleaning. Danger of electrical shock! Before cleaning switch the appliance offand rem ve the plug from the mains, or switch off or turn out the circuit breaker or fuse.
What to do if ... Correcting Malfunctions A malfunction may be caused by only a minor fault that you can rectify yourself using the following instructions. Do not perform any other work on the appliance if the following information does not provide assistance in your specific case.
Malfunction Possible Cause Remedy Carefully warm the leaking sections of the door seal with Door seal is not air tight a hair dryer (not hotter than Heavy build up of frost, (possibly after changing over approx. 50 °C). At the same possibly also on the door seal.
2223 425-73-00-16032007 Änderungen vorbehalten Sous réserve de modifications Wijzigingen voorbehouden Subject to change without notice...