Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Electrolux EFC 9550
Summary of Contents for Electrolux EFC 9550
- Page 1 EFC 9550...
- Page 2 Dear Customer, If you follow the recommendations contained in this Instruction Manual, your appliance will give you constant high performance and will remain efficient for many years to come.
- Page 3 • The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. • The minimum safety distance between the cooker top and the extractor hood is 650 mm. • Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of the hood.
- Page 6 Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • Draw a horizontal line at 650 mm above the hob. •...
- Page 7 • Before attaching the hood body, tighten the two screws Vr located on the hood body mounting points. • Hook the hood body onto the screws 12a • Fully tighten support screws 12a • Adjust screws Vr to level the hood body When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø...
- Page 8 • Assemble the two halves of the hood body extension piece 14. • Push fit the assembled hood body extension piece 14 onto the air outlet. • Push fit connection 15 onto the hood body extension piece 14. • Insert the connection extension pieces laterally 14.1 in connection 15.
- Page 9 Light Switches the lighting system on and off. Motor running led. Motor Switches the extractor motor on and off at low speed. Used to provide a contin- uos and silent air change in the presence of light cooking vapours. Speed Medium speed, suitable for most operating conditions given the optimum treated air flox/noise level ratio.
- Page 10 • The filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher. • Remove the filters one at a time by pushing them towards the back of the group and pulling down at the same time.
- Page 12 This appliance conforms to European Low Voltage Directive 73/23/CEE governing electrical safety, European Directive 89/ 336/CEE on Electromagnetic Compatibility and Directive 93/68/CEE regarding CE Marking.
Need help?
Do you have a question about the EFC 9550 and is the answer not in the manual?
Questions and answers