AEG ARCTIS Operating Instructions Manual page 14

Reversing the door
4. Unscrew Phillips screw from the
door bottom right and remove
door fitting (1). Insert door fitting
supplied in the door bottom left
and fasten with Phillips screw (2).
Carefully remove the door to the
front and place on one side.
5. Move the upper bearing pivot to
the left.
6. Carefully slide the door onto the
top bearing pivot and close.
7. Place the lower door bearing with
the bearing pivot in the lower left
of the door and fasten.
8. Move the door handle from the left to
the right and cover the remaining
holes with the hole cover pins
attached.
9. Open the door and fit the plinth
cover.
112
818 36 10-01/6