Cable Safety Clip; Safety Features; Switching On And Off - GMC HedgeHog BHT500 Instruction Manual

500w 460mm hedge trimmer
Table of Contents

Advertisement

Cable safety clip

Locate the rectangular slot
in the lower part of the rear
handle and the position of
the moulded hook. Form a
loop in the extention cord and
insert the loop through the
rectangular slot. Twist the loop
through 180
and hook the
0
loop over the moulded hook,
pull tight to secure the cable.

Safety features

1. The lower blade teeth have extended points with
rounded ends to reduce the chance of injury in case of
accidental contact.
2. The rear handle trigger switch (1) and front handle
bar switch (2) must be operated together to start the
motor. This ensures that both hands are used to control
the trimmer.
3. If either of the two switches is released, the trimmer
will stop instantly.

Switching on and off

This Hedge Trimmer is fitted with two safety interlocked
switch levers for safety.
1. To switch on, press both the rear handle trigger
switch(1) and the front handle bar switch (2) at the
same time.
2. To stop the Hedge Trimmer move the Hedge Trimmer
away from the cutting area and release either one of
the switches.
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hedgehog mx460

Table of Contents