Temperature and Humidity Ranges
If you check the following tables, you can use your air conditioner more efficiently.
If the air conditioner is used at...
Heating capacity
Low temperatures
Protection mechanism
Operation
Heating
Cooling
Dehumidifying
The standardized temperature for heating is 7°C. If the outdoor temperature drops to 0°C or below,
the heating capacity can be reduced depending on the temperature condition.
If the cooling operation is used at over 32°C(indoor temperature) then, it does not cool at its full capacity.
Operating Your Air Conditioner Without the Remote Control
26
E-
Then...
The air conditioner may stop operating for the reason of protection.
Water may leak and some malfunction may occur if the heat exchanger freezes.
Water may condense and drip from the surface of the indoor unit if you don't use the
air conditioner for a long time.
Outdoor Temperature
-20°C to 24°C approx.
-5°C to 43°C approx.
-5°C to 43°C approx.
You can operate your air conditioner directly without the remote control.
1
Open the front grille.
2
To turn the air conditioner on, press the On/Off button in the front grille of the
indoor unit.
Result:
3
To turn the air conditioner off, press the On/Off button again.
Note
Indoor Temperature
27°C or less
21°C to 32°C approx.
18°C to 32°C approx.
The Operation indicator on the indoor unit lights up.
The indoor unit beeps.
The air conditioner starts up in the appropriate mode for the
room temperature. The air conditioner changes the Cool or Heat
mode automatically depending on the current
temperature during operation.
Room Temperature
Lower than 21°C
Higher than 21°C
Even if you turned the air conditioner on with the On/Off button,
you can control it with the remote control.
Indoor Humidity
-
80% or less
-
Operating Mode
Heating
Cooling