Table of Contents
Advertisement
18 electrolux installation instructions
To remove the fin
1. Switch on down draught extractor
and move to the top position.
2. Switch off fan level.
3. Press in and remove the springs of
the filter.
4. Take filter out.
5. Remove upper casing and place on
something soft.
6. Remove the two screws which hold
the fin.
7. Remove single screw that holds the
lever that closes the fin.
8. Remove the fin.
To fit cover
1. Lay cover on the glass ceramic.
2. Position cover on the upper housing.
3. Mark four holes on the upper casing.
Use cover as a template.
4. Remove cover and drill the four holes
in the upper casing.
5. Remove adhesive film.
6. Press cover in position on the upper
casing.
7. Affix cover with the blind rivets sup-
plied.
8. Install filter, springs and upper casing
in reverse order.
Advertisement
Table of Contents
