Table of Contents
Advertisement
Operating Instructions
... the whole indicator section for residual heat, except h, will fail
all of a sudden?
Check, whether
0
– the On/Off button has been operated accidentally.
– the touch controls are entirely or partly covered by liquid or by a wet
cloth.
– the safety cut off has operated.
... after cooking zone switch-off the display will not show j or h
for residual heat?
0
Check, whether
– the cooking zone has only been in operation for a short while, and is
therefore not hot enough.
If the cooking zone is hot, please contact your local Service Force Cen-
tre.
... a cooking zone cannot be switched on?
0
Check, whether
– the child-safety (symbol L) is switched on.
... the display f flashes?
The front left cooking zone has been temporarily cut off by the elec-
3
tronic control to protect against overheating. The zone cannot be reac-
tivated until the appliance has cooled down (f goes off). The other
three cooking zones will continue to function.
... all displays (inclusive of residual heat indicator h) go out dur-
ing cooking?
0
The overheating protection of the electronic controls has blocked the
use of the hob. Once the cooking zone has cooled down it can be oper-
ated again.
... the display f lights up?
Check, whether
– the touch controls are entirely or partly covered or contaminated by
liquid or by a wet cloth.
0
Clean the ceramic glass surface and wipe it dry.
Switch off the automatic safety cutout briefly or unscrew the fuses.
If the f display continues to be illuminated please contact customer
services.
120
Advertisement
Table of Contents
