1. Manuals
  2. Brands
  3. AEG Manuals
  4. Hob
  5. 6310 K-m
  6. Instruction book

AEG 6310 K-m Instruction Book

Hide thumbs Also See for 6310 K-m:
Table of Contents

Advertisement

Quick Links

INSTRUCTION BOOK
GB

Advertisement

Table of Contents
loading

Related Manuals for AEG 6310 K-m

Summary of Contents for AEG 6310 K-m

  • Page 1 INSTRUCTION BOOK...
  • Page 2 Congratulations from AEG Dear Customer, Congratulations with your new Hob. It is important that you become familiar with the functions and features of the Hob. You should therefore read these operating instructions as they will help you get the most out of your new Hob.
  • Page 3 How to read the operating instructions: 1... 2...Step by step Hint and tips Safety information Environmental information...

  • Page 4: Child Safety

    Disposal Make the hob unusable by cutting off Do not use the hob if it is damaged in the cable. any way, contact your local AEG Service Centre. Dispose of any packaging material and old appliances at an authorised disposal site.

  • Page 6: Ceramic Glass Surface

    Ceramic glass surface means that you do not have to adjust the heat constantly. CHEC The ceramic glass surface has four control provides the zones with the cooking zones. When a zone is following functions: turned on, it will illuminate at various intervals depending on the Automatic disconnection of heat setting selected.
  • Page 7 Connection of child safety device on zones Turn the 2 control buttons to at the same time. The display will show: When you turn on a zone the display will show: To turn on a zone, turn the 2 control buttons to at the same time.
  • Page 8 Protection of the glass ceramic surface A protective film should be applied to the glass ceramic surface before use. This will make it easier to clean the surface, as well as preventing substances from being burnt onto the surface. This is what to do: 1.
  • Page 9 Switch symbols (to the left) control for regulating the small cooking zone at the rear control for regulating the double cooking zone at the front. control for regulating the large cooking zone at the rear control for regulating the small cooking zone at the front.
  • Page 10 Residual-Heat indicator When you switch off a zone, an "H" in the display indicates that the zone is still hot. The residual heat indicator will continue to be illuminated as long as the temperature exceeds 80˚C. Cooking zones The control knobs are continuously adjustable from 1 to 9 (9 is the highest setting).
  • Page 11 CHEC control Autostop If you forget to turn a cooking zone off after use, it will be disconnected automatically after a specific period of time. The higher the setting, the shorter the time before the zone is disconnected. Setting AUTOSTOP 6 hours 6 hours 5 hours...

  • Page 13: Child Safety Device

    Disconnection of AUTOMAX: If you do not wish to use AUTOMAX, observe the following procedure: 1. Turn the control button to A 2. Then turn the control button to the required setting. Setting the large zone on the double zones 1.
  • Page 14 When you turn on a zone the display will show: Observe the following procedure to use a zone: 1. Turn the 2 buttons to at the same time. 2. Use one of the zones within 10 seconds. The light under the symbol in the display will disappear.

  • Page 15: Advice And Hints For Using The Cooking Zones

    Advice and hints for using the over will burn onto the hot cooking zone. cooking zones If you use the advice below Saucepans with very you will save energy and shiny/bright bases will make your cleaning tasks prolong the cooking time easier.
  • Page 16 Check whether your cooking utensils has level bases by placing the item in question upside down on a work top and positioning a ruler on the base. A curved base, both inwards and outwards, will prolong the cooking time and increase the energy consumption.
  • Page 17 For reasons of hygiene and safety, the cooking zones must be kept clean. Grease stains and spilled food generate smoke when heated, and can even cause fire. The splashguard can be removed to make it easier to clean the surface. What to do: 1.

  • Page 18: Stainless Steel Surfaces

    Stainless steel surfaces 3. Wipe the ceramic hob clean with a damp cloth or kitchen roll. Clean the appliance after use with a Tough stains can be removed by soft cloth well wrung out in warm rubbing the stain hard with water, use a small amount of liquid kitchen roll.
  • Page 19 Do not slide saucepans across the surface of the hob - always lift the pan when placing it on, or removing it from the ceramic surface. Wipe the bottom surface of the pots and pans with a clean dry cloth before placing them on the ceramic surface.
  • Page 20 The decorative pattern on the ceramic surface can become scratched and marred with use, depending upon maintenance, but does not adversely affect performance. Such blemishes are not covered by the warranty and do not affect the operation of the hob. Spills and melts must be removed immediately, while the surface is still warm, using the scraper supplied with...
  • Page 21 Caution: In order to avoid a hazard this appliance must be installed according to these instructions for installation The appliance unit can be mounted in any type of kitchen with a work top whose thickness is between 28 mm and 40 mm.

  • Page 22: Installation Of A Single Unit

    It is not necessary to attach the reinforcement beam to the work top surface, as it is held in place by a specially designed moulding, which is incorporated in the hob units flanges. The units externally measured length 145 mm: Cooker hood 290 mm: Two-zone ceramic-top electric hob...
  • Page 23 The electrical connection may only be performed by a qualified electrician/ competent person. The electrical connection must be carried out in accordance with prevailing regulations for appliances using heavy current. The connection must comply with any specific requirements specified by the local electricity supply authority.

  • Page 24: Technical Data

    Two-phases zero-earth Cable type 1,5 mm² HO5VV-F. The cable outside diameter must be between 7,5 and 10,5 mm. Technical data Cell Voltage 230 V Electrical connection 230V - 50Hz Total wattage 6400W Instant heat effect Left front 12/18 cm 700/1700 W Left Back 14 cm 1200 W...

  • Page 25: Before Calling Service - Technical Advice

    Before calling service – Technical advice Sympton Solution Check your earth leak circuit breaker. The hob is not working Check fuses. The ceramic hob will reach a The hob becomes hot temperature of 80˚C. It may, however, become even hotter if you use cooking utensils with uneven bases or which does not match the size of the cooking zone.
  • Page 26 Problems Solution Zones will not come on, Child Turn the 2 display shows control safety device has been activated. buttons with symbol for child safety device to simultaneously. Then activate one of the zones within 10 seconds. Zones will not come on, Autostop Turn all the control display shows has been activated.
  • Page 27 Deep fat frying 4. Cooking the food Lower the food gently into the oil. Do For safety purposes, when deep fat not add too much food at once or the frying, fill the pan 1/3 full of oil. Do temperature of the oil will be reduced not cover the pan with a lid and do and may result in soggy, greasy food.
  • Page 28 It is better to use two pans rather than overfill one, or use half quantities. 3. What to use Use firm fruit or vegetables and wash well before using. 4. Types of sugar Preserving sugar gives clear jam, however granulated sugar is cheaper and gives equally good flavour.

Table of Contents