Portrait flat-panel tilt wall mount (with security) (12 pages)
Summary of Contents for Tripp Lite DWT1323S
Page 1
(88lbs) Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com Русскоязычная версия настоящего руководства представлена на веб-сайте компании Tripp Lite по адресу: www.tripplite.com Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com...
WARRANTY REGISTRATION Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary.
Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit www.tripplite.com/support for service. DWT1323S Package M M4X14 (x4) M5X14 (x4) D5 washer (x4) Package W...
Page 4
1.Disassemble VESA Plate Use a screwdriver to loosen the bottom screws in order to separate the VESA plate from the wall mount. 2a. Mount on Wood Stud Wall Find and mark the exact location of mounting holes Anchor Bolt 5mm-8mm Drill pilot holes Tighten the screw spacing 5mm-8mm to wall plate.
Page 5
2b. Mount on Solid Brick and Concrete Block Mark the exact location of mounting holes Concrete Anchor Drill pilot holes Anchor Bolt 5mm-8mm Screw the wall mount onto the wall Tighten the screw spacing 5mm-8mm to wall plate. WARNING • When installing wall mounts on cinder block, verify the actual concrete thickness is at least 1-3/8”...
Page 6
3. Install the Wall Plate (For clarity, outer cover is not shown.) Align top hole of wall plate to screw in wall and lower the wall plate until the screw is seated in upper area of tear-drop mounting hole. Anchor Bolt Install the other screw and level the wall plate, then tighten all screws securely.
Page 7
4. Install the VESA Plate Top of display D5 Washer M4X14 M5X14 D5 Washer M4X14 M5X14 Screw VESA plate onto the display. Tighten all screws but do not over tighten. 13-09-229-93-32A5-EN.indd 7 10/31/2013 9:59:09 AM...
Page 8
5. Hang the display onto the Wall Plate Wall Hook the VESA plate (attached the display) onto the wall plate and tighten the screw to secure it. 6. Adjustment Wall Wall +10° -15° Push or pull from the top or bottom of display to obtain a desired angle. Maintenance •...