Page 1
(200lbs) Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com Русскоязычная версия настоящего руководства представлена на веб-сайте компании Tripp Lite по адресу: www.tripplite.com Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com...
WARRANTY REGISTRATION Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary.
Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit www.tripplite.com/support for service. (x1) (x1) (x1) Package M M5X14 (x4) M6X14 (x4) M8X20 (x4) M6X30 (x4) M8X30 (x4) Washer (x4)
Page 4
1a. Mount on Wood Stud Wall Find and mark the exact location of mounting holes Drill pilot holes D6 Washer Anchor Bolt Screw the wall plate onto the wall WARNING • Make sure that mounting screws are anchored into the center of the studs. Use of a stud finder is highly recommended.
Page 5
1b. Mount on Solid Brick and Concrete Block Mark the exact location of mounting holes Drill pilot holes D6 Washer Concrete Anchor Anchor Bolt Screw the wall plate onto the wall WARNING • When installing wall mounts on cinder block, verify the actual concrete thickness is at least 1-3/8”...
Page 6
2. Install Adapter Brackets Top of display 2-1 For Flat Back Screen M5X14 M6X14 M8X20 Washer 13-09-237 93-32E4-EN.indd 6 10/31/2013 12:25:32 PM...
Page 7
2. Install Adapter Brackets 2-2 For Recessed Back Screen or to Access A/V Inputs M8X20 M6X30 M6X30 M6X30 M8X20 M8X30 M8X30 M8X30 Washer Washer Washer Washer Small Spacer Small Spacer Small Spacer Big Spacer Small Spacer Big Spacer Note: Choose appropriate screws, washers and spacers (if necessary) according to the type of screen.
Page 8
3. Hang Display onto the Wall Plate Wall Wall Bolt Tighten bottom bolts to secure display brackets to the wall plate. 4. Adjustment Tilt adjusting knob 0° -10° Loosen the adjusting knobs to tilt to desired angle then retighten them. When tilting the display, apply pressure equally to the top and bottom of the display.